-
Senzor inductiv Balluff BAW0029
Manufacturer Part Number BAW0029 Protection class II Protection type IEC 60529 IP67 Diagnostic coverage 0 % Functional safety no Mission Time 20 a Approval/Conformity CE cULus EAC Basic standard BWN PR 44 IEC 60947-5-2 IEC 60947-5-7 Housing material Brass Material sensing surface PBT Dimension Ø 18 x 65 mm Installation non-flush Size M18x1 Tightening torque 25 Nm Range 4…16 mm Function indicator Adjustment indicator -
Bosch Rexroth R900558356
– Valve for closed loop control of direction and volume of
a flow
– Operation with proportional solenoids with central
thread and removeable coil
– For subplate mounting:
– Spring-centered control spool
– Model WRAE with integral valve electronics
– Control electronics for model WRA: -
Bosch Rexroth M-3SED6CK1X/350CG24N9K4
Maximum Operating Pressure
350 bar
Manufacturer Series
1X
Solenoid Type
Single
Marca
Bosch Rexroth
Power Supply Voltage
24V dc
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+50°C
Number of Ports
3-way
Spool Type
CK
Number of Positions
2
Maximum Flow Rate
25L/min -
Senzor Balluff BES00P7
DimensionØ 8 x 45 mmStyleM8x1Installationfor flush mountingRange2 mmSwitching outputPNP normally open (NO)Switching frequency5000 HzHousing materialStainless steelMaterial sensing surfacePBTConnectionConnector, M8x1-Male, 3-poleOperating voltage Ub10…30 VDCAmbient temperature-40…85 °CIP ratingIP68Approval/ConformitycULus, CE, EAC, WEEE
Bosch Rexroth 4WREE 6 E32-2X/G24K31/A1V
WRE(E) direct operated proportional directional control with integral feedback are available with or without onboard electronics (OBE). Positive overlap spools reduce leakage at center, while underlap spools can be utilized for closed-loop functions. Individual amplifiers are available, while OBE models are possible with either a voltage or current command.
Features
Sizes 6 to 10
For mounting:
– Size 6: Porting pattern according to ISO 4401-3, NFPA T3.5.1M R1, and ANSI B 93.7 D 03
– Size 10: Porting pattern according to ISO 4401-5, NFPA T3.5.1M R1, and ANSI B93.7 D 05
Control of the direction and magnitude of a flow
Proportional solenoid operation
Spring-centered control spool
Different spool overlaps possible
Integrated control electronics (OBE) for type 4WREE
Bosch Rexroth 4WREE 6 E16-2X/G24K31/A1V
WRE(E) direct operated proportional directional control with integral feedback are available with or without on-board electronics (OBE). Positive overlap spools reduce leakage at center, while underlap spools can be utilized for closed-loop functions. Individual amplifiers are available, while OBE models are possible with either a voltage or current command.
Features
Sizes 6 to 10
For mounting:
– Size 6: Porting pattern according to ISO 4401-3, NFPA T3.5.1M R1, and ANSI B 93.7 D 03
– Size 10: Porting pattern according to ISO 4401-5, NFPA T3.5.1M R1, and ANSI B93.7 D 05
Control of the direction and magnitude of a flow
Proportional solenoid operation
Spring-centered control spool
Different spool overlaps possible
Integrated control electronics (OBE) for type 4WREE
SMC VS7-6-FG-S-3-Q
Dimensions of SMC’s VS7 series conform to ISO interface sizes 1 and 2. The pilot operated metal seal design allows the valve to be used with non-lube dry air and still maintain a long life.T he VS7 is available in 2 or 3 position, double or single action.? Manifolds are available with a large variety of functions and piping configurations.
Size 1, ISO interface solenoid valve
Fluid: air/inert gas
Operating pressure: 0.1 to 1.0MPa
Single or double solenoids
Options include indicator light, direct manual override, wedge packing style, individual pilot EXH, surge voltage suppressor
SMC CDJP2B4-10D-B 020
Available in four bore size options, series CJP2 includes a tiny, but powerful, 4mm bore size option making it the smallest double acting pin cylinder around 6, 10 and 16mm bore sizes complete the range, all featuring extruded aluminium bodies, making them not only compact, but extremely lightweight Series CJP2 is auto switch capable and other options include rubber bumper cushions and made to order models including both heat and cold resistant types. Mounting possibilities include basic/panel, flange, foot, clevis and trunnion options.
The body material has been changed from brass to aluminum, achieving impressive weight reduction.
The overall length of the cylinder has been reduced resulting in an extremely compact cylinder.
Solid state auto-switches can also be mounted now.
Longer stroke options are now available.
Internal rubber bumpers provide quieter operation and longer life (up to 5 million cycles).
